top of page

Seats 

Suzuki RL250/Exacta/Beamish Mark 1

IMG_8188_edited_edited.jpg

Mark 1 Seat complete

Cost is £145 plus P&P.

To order please contact us by email sbownersclub@gmail.com

Suzuki Beamish Mark 2

IMG_7872_edited_edited.jpg

Mark 2 Seat Complete

Cost is £145 plus P&P

 

To order please email us on sbownersclub@gmail.com 

RL250/RL325/Beamish Mark 3

IMG_6242_edited_edited_edited.jpg

Mark 3 Seat Complete

Cost is £145 plus P&P

 

To order please email us on sbownersclub@gmail.com 

Seat Covers

Suzuki Exacta/Beamish Mark 1

IMG_5324_edited.jpg

Suzuki Exacta/RL250/Beamish Mark 1 Seat Cover

Cost is £45.00 plus P&P.

To order please contact us on sbownersclub@gmail.com

Suzuki Beamish Mark 2

IMG_7891_edited_edited.jpg

Suzuki Beamish Mark 2 Seat Cover

Cost is £45.00 plus P&P.

To order please contact us on sbownersclub@gmail.com

Suzuki Beamish Mark 3

IMG_5337_edited.jpg

Suzuki Beamish Mark 3 Seat Cover.

Cost is £45.00 plus P&P.

To order please contact us on sbownersclub@gmail.com

Guards

Back Chain Guard

chainguard_black_plastic (1).jpg

Black Chainguards in plastic as original

Cost is £25 + P&P.

To order please contact us on sbownersclub@gmail.com

Alloy Chain Guard

Chainguard_Mk2.jpg

Alloy chainguards (unpolished) now available for the Mk2 silver engine Beamish with the triangular side panels but will actually fit all models

Made to Order

Cost is £45 + P&P.

To order please contact us on sbownersclub@gmail.com

Rubbers

Inlet Manifold

IMG_7885.JPG

Carb to Airbox Rubber

IMG_7880_edited_edited.png

Beamish Mark 2 Inlet Tube

inlet-tube1.jpg

Black engine Inlet manifold connect the reed block to the carburettor. Newly manufactured in NBR to withstand modern fuels. Replaces part number 13110-38100. These are purpose made for the black engine Beamish not modified Yamaha ones.

Cost is £37 + P&P.

To order please contact us on sbownersclub@gmail.com

Mk1 Beamish (silver engine with long thin side panels) or RL250 Exacta carburettor to airbox rubbers. Replaces part number 13881-38000 & 13881-30001. These are brand new and made from EPDM to cope with heat and retain flexibility.

Cost is £20 + P&P.

To order please contact us on sbownersclub@gmail.com

Rubber inlet tube for the Mk2 Beamish (silver engine with triangular side panels). These are brand new and made from EPDM to cope with heat and retain flexibility.

Cost is £20 + P&P.

To order please contact us on sbownersclub@gmail.com

Rubbers

Suzuki Beamish Mark 3 Inlet Tube

inlet-tube2_edited.jpg

Rubber inlet tube (carb to airbox) for the black engine Beamish. These are brand new and only just available! Finally you can replace your old hard inlet rubber for a new one that will actually form a seal!

Cost is £21.50 + P&P.

Visit our Ebay shop

 https://www.ebay.co.uk/itm/257118693666

Tank Strap

IMG_7906.JPG

Black engine Beamish tank strap brand new and remanufactured from natural rubber for elasticity. Also fits the early (1971-73) TS125 & TS185 and maybe later models

Cost is £15 + P&P.

To order please contact us on sbownersclub@gmail.com

Other

Tanks

tanks1.jpg

Tanks - All Models

Made to Order

To order please contact us on sbownersclub@gmail.com

Airbox

Airbox 1_edited.jpg

Exhaust Gasket

Exhaust Gasket _edited.jpg

Mark 3 Airbox

 

Cost is £175 plus P&P.

Visit our Ebay shop

Mark 3 Exhaust Gasket

Black Engine

Cost is £6 plus P&P.

To order please contact us on sbownersclub@gmail.com

Petrol Caps

Petrol Cap 3_edited_edited.jpg

Petrol Caps

Used

Cost is £20 plus P&P.

To order please contact us on sbownersclub@gmail.com

Mark 3 Rear Brake Rods

Pic 55_edited_edited.jpg

Mark 3 Rear Brake Rods

Remeanufactured

Chromed

Cost is £35 plus P&P.

To Pre-order please contact us on sbownersclub@gmail.com

bottom of page